|
SecureNet8001/P/W
Step 1
- Plug Power and Ethernet Jack
- Plug AC/DC Power Adapter and RJ45
cable into NetCam8001.
Step 2
- Get a PC/Laptop ready on the network
- Plug
PC/Laptop with an ethernet to the same network and use IP
finder ( in CDROM ) to search NetCam8001 , then change NetCam8001 IP address into your
desired IP address network.
Step 3
- Ready to view and control
- Bring up an
Internet Explorer 6.0 or above. Enter the NetCam IP
address and follow the procedure to download small program.
You can view the camera immediately .
- NetCam8001 Web Client allows you to view and control your camera . You can quickly pan (+135°, -135°) and tilt (-45°,+90°) or listen through the built-in microphone.
- Remotely access the NetCam8001 on the web page from anywhere in the world using Internet Explorer 6.0 or later.
- Wired/Wireless Network Camera
- High Quality 30fps D1 MPEG4/MJPEG
- 7 Speeds, Pan/Tilt/Digital Zoom x 4
Camera
- SONY Quality 1/3" CCD Sensor
- Real Time Streaming (RTSP) Any IP
Network
- Motion/Alarm Detect & Recordable
- 2 Ways Audio
- 3GPP, SMTP,FTP,HTTP Event Notification
- Power Ethernet, 802.11b/g options
- Easy Install / PnP Device
|
Model Name |
NetCam 8001 |
NetCam 8001P |
NetCam 8001W |
|
Ethernet |
Yes |
No |
Yes |
|
Power Over Ethernet |
No |
Yes |
No |
|
Wireless LAN |
No |
No |
Yes |
|
Power consumption |
9W |
10W |
10W |
- Windows 2000 Professional SP4 or XP
SP2 Home/Professional
- 256 MB Memory
- Ethernet / WLAN
- Internet Explorer 6.0 or above
- VGA Resolution 800 x 600 or above
- CPU-Pentium 4 2.4Ghz or above ( If you
like to monitor multiple IP Camera and record, Pentium 4
with 3Ghz or above or Dual-Core Intel processor, 1G Memory
and 32M display card are recommended )
|
 |
BUY
DOWNLOAD:
|
